|
ECS 3X
Item#:
03490170
Price: $134.39USD
|
|
ECS 3X
- Electro-Acoustic Crossover
Frequencies: 500 Hz and 2500 Hz
- Crossover Slope: 12 dB/Oct. (2nd
order) Low pass, band pass and high
pass. High pass has CD horn EQ and
tweeter attenuation built-in.
- Power Handling of Crossover
Network (when connected to suitable
power handling speakers, and an amplifier
with adequate headroom): 1000W
program material.
- Midrange and Tweeter Protection:
SoundGuard long and medium term
thermal overload protection. Sized
to protect a midrange from 75W to
100W of rated power handling, and
a compression driver tweeter with a
power handling rating from 40W to
80W.
- Inputs: One quarter inch phone
jack paralleled with one Neutrik NL4
Speakon 4-pin connector for Full Range
inputs.
One Neutrik NL4S Switching Speakon
for bi-amp inputs, allows direct
connection to the speakers in the
system. Only Neutrik brand 4-pin
Speakon plugs should be used with the
bi-amp switching jack.
- Outputs: Woofer output is a yellowblue
set of wires, with stripped tinned
leads. Yellow is positive, blue is
negative.
Midrange output is a white-black set of
wires, with S205 push-on connectors
that mate with a wide variety of
midrange speakers. White is positive,
black is negative. Tweeter output is a
red-black set of wires, with S205 pushon
connectors that mate with a wide
variety of compression driver tweeters.
Red is positive, black is negative.
- Intended Low Frequency Speaker
Type: Direct radiator 15" professional
sound reinforcement woofer of 8 Ohms
nominal impedance. A 12" professional
sound reinforcement woofer that has
adequate low frequency response can
also be used.
- Intended Mid-range Speaker Type:
Direct radiator dynamic midrange, from
10" diameter to 6 " in diameter and of
8 Ohms nominal impedance. Open or
closed back type, but open back type
should have a sub-enclosure for the
rear to prevent woofer from modulating
the mids via cabinet pressure.
- Intended High Frequency Speaker
Type: 1.6" to 4" diaphragm diameter
compression driver tweeter of 8 Ohms
nominal impedance, mounted on a
Constant Directivity horn.
|
|
|
|
