|
ECS® 150X
Item#:
03490180
Price: $109.19USD
|
|
ECS® 150X
- Electro-Acoustic Crossover
Frequency: 150 Hz
- Crossover Slope: 12 dB/octave (2nd
Order) high pass and low pass.
- Power Handling of Crossover
Network (when connected to suitable
power handling speakers, and an amplifier
with adequate headroom): 1000W
program material.
- Inputs: One quarter inch phone jack
for Full Range input. One Neutrik® NL4S
Switching Speakon® for direct connection
to the speaker/s in the subwoofer system.
Only Neutrik brand 4-pin Speakon plugs
should be used with the bi-amp switching
jack.
- Outputs: Subwoofer output is a yellowblue
set of wires, with stripped tinned
leads. Yellow is positive, blue is negative.
High Pass output is one quarter inch
phone jack on the input cup, labeled:
High Out.
- Intended Speaker Type: 4 to 8 Ohm
nominal impedance subwoofer driver
with or without connection of a 4 to 8
Ohm nominal full-range speaker system
as the high frequency section. A range of
impedances is allowed due to the broad
tuning of the crossover network.
|
|
|
|
